it is getting colder outside
24/7 overclock.
100% stable.
Last edited by james@alienware (2009-11-28 09:14:20)
very nice james, what a lot of headroom . . .
Absolute max clock with my old C0. My D0 can't reach a such high speed because of the base clock limit, but it can reach higher 24/7 clock than my C0.
i7 @ 4441,4 MHz
i7 @ 4441,4 MHz
How on earth did you do that on a c0? what settings?
Skills, skills... I did it a long time ago so I can't perfectly recall it but if I remember correctly, I think VCore and V VTT was over 1,5V and other volts quite high too. Anyways a suicide run with suicide volts and really unstable.
I did 4+ hours Prime95, the text disappeared when I tried to resize the window
الشعب يريد اسقاط النظام
...show me the schematic
...show me the schematic
1.44v? Ouch.
I know.. I will play a bit with itFinray wrote:
1.44v? Ouch.
الشعب يريد اسقاط النظام
...show me the schematic
...show me the schematic
only 1 hour prime, I wanna play now
الشعب يريد اسقاط النظام
...show me the schematic
...show me the schematic
Run LinX 20 passes if you want some sort of stability, 1 hour of prime is as good as playing solitaire while surfing the web.
>8 hours of prime if you run it....
>8 hours of prime if you run it....
Last edited by GC_PaNzerFIN (2010-08-05 07:19:42)
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
you were right! It was in a need for moreGC_PaNzerFIN wrote:
Run LinX 20 passes if you want some sort of stability, 1 hour of prime is as good as playing solitaire while surfing the web.
>8 hours of prime if you run it....
الشعب يريد اسقاط النظام
...show me the schematic
...show me the schematic
Protip: Don't use photobucket, it resizes the pics, use imgur.
Also weird how my Q9300 can take 3.8Ghz on 1.3 no problem, but an i5 can't get to 4Ghz without going over 1.4
I run at 3.2 normally, the temps at 3.8 are too high for my F7P. Need a new cooler.
Also weird how my Q9300 can take 3.8Ghz on 1.3 no problem, but an i5 can't get to 4Ghz without going over 1.4
I run at 3.2 normally, the temps at 3.8 are too high for my F7P. Need a new cooler.
I have seen a some i5 750 @ 4 GHz runing on 1.4 V. I would say as long as they are stable.....Finray wrote:
Protip: Don't use photobucket, it resizes the pics, use imgur.
Also weird how my Q9300 can take 3.8Ghz on 1.3 no problem, but an i5 can't get to 4Ghz without going over 1.4
I run at 3.2 normally, the temps at 3.8 are too high for my F7P. Need a new cooler.
http://i.imgur.com/yrY2m.png
الشعب يريد اسقاط النظام
...show me the schematic
...show me the schematic
Well every chip is different. My 750 takes 1.44 but that seem to not be the norm. Most I've seen are usuall in the 1.3 to 1.35 and some @ as low as 1.25.Finray wrote:
Protip: Don't use photobucket, it resizes the pics, use imgur.
Also weird how my Q9300 can take 3.8Ghz on 1.3 no problem, but an i5 can't get to 4Ghz without going over 1.4
I run at 3.2 normally, the temps at 3.8 are too high for my F7P. Need a new cooler.
http://i.imgur.com/yrY2m.png
all pussy % overclocks. i need a 100%+ buddy
I can hit 3.8Ghz but it runs a little too toasty on a F7P.
On a shitty celeron. Still shit after 100% OC. Do that on i7 and you need 5.33GHz...menzo wrote:
all pussy % overclocks. i need a 100%+ buddy
Oh and has 3 cores less and 7 threads less. One might say the actual performance increase from 50% OC on i7 is a lot more than 120% on that single core celly.
Last edited by GC_PaNzerFIN (2010-08-06 07:25:12)
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
shh, you still suck
fuckin dweebs still cant beat me
Running stable at 40*C idle, usually not more than 55*C under load. Thanks alex.
No problem.Canin wrote:
http://i942.photobucket.com/albums/ad26 … rclock.jpg
Running stable at 40*C idle, usually not more than 55*C under load. Thanks alex.
Liking these temps, might just keep it here tbh
Last edited by Aries_37 (2010-08-10 16:23:58)
No way, you have a good 15c left, go for more. I wish mine would run on that little voltage.
Yeah luckily it must be from a pretty decent batch.
Currently trying to push the clock while keeping C-states and EIST enabled. Lots of fiddling with the LLC and dynamic vcore. Fun times
Currently trying to push the clock while keeping C-states and EIST enabled. Lots of fiddling with the LLC and dynamic vcore. Fun times