Since we can't have all these sexy flamewars in the official thread, let's have this one, and bump it up whenever things get off topic.
Make sure you provide a link to related posts in the other thread, or nobody will get shit.
I'll start:
Started here.
Make sure you provide a link to related posts in the other thread, or nobody will get shit.
I'll start:
It all depends on how the output source is designed. Many DACs and such are current-limited, as they're made to power loads of a couple of kilo-Ohm, such as amplifiers. Others are designed to power <100Ohm loads, and are thus much more powerful. There is more than one kind of DAC out there, you know. It's an active component..Sup wrote:
If I understand you correctly plugging headphones into Passive RCA out will power them? Is that what you are saying?Freezer7Pro wrote:
Analogue audio "signal" is the same as what you get out of the amplifier, just weaker. There are single-chip DACs with a powerful-enough output to drive a pair of headphones..Sup wrote:
The sole purpose of Digital to analog converter is just what its initials say. DAC does not output any power, thats why we use amps. What DAC does output is not power but signal. Every signal needs to get amplified if you want to hear sound and standalone DACs don't have amplifiers hence no volume knob on any of them.
Normal headphones don't need a lot of power to run. You can plug an amplifier into an MP3 player without turning the volume to the bottom.
Started here.
Last edited by Freezer7Pro (2009-04-09 16:15:44)
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP