GC_PaNzerFIN
Work and study @ Technical Uni
+528|6632|Finland

FloppY_ wrote:

GC_PaNzerFIN wrote:

twoblacklines wrote:

my e5200 is at 3.6ghz 24/7

will i see any noticeable performance increase by going after 4ghz ?
not really.... but your E-penis will be this ==== much bigger.
Is there even any notable difference between e.g. stock E8400 @ 3Gz and OC'd E8400 @ 3.6Ghz?
It starts to be about noticable. its 20% increase in clocks afterall...
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
Finray
Hup! Dos, Tres, Cuatro
+2,629|6006|Catherine Black
So will I notice going from 2.5Ghz to 3.6?

Also, twoblacklines, what fan are you using, and what temps are you getting?
https://i.imgur.com/qwWEP9F.png
FloppY_
­
+1,010|6503|Denmark aka Automotive Hell

GC_PaNzerFIN wrote:

FloppY_ wrote:

GC_PaNzerFIN wrote:


not really.... but your E-penis will be this ==== much bigger.
Is there even any notable difference between e.g. stock E8400 @ 3Gz and OC'd E8400 @ 3.6Ghz?
It starts to be about noticable. its 20% increase in clocks afterall...
Yeh,,, Maybe I will do so since you can do it by changing the FSB to 400Mhz with a multiplier @ 9x
­ Your thoughts, insights, and musings on this matter intrigue me
max
Vela Incident
+1,652|6785|NYC / Hamburg

Finray wrote:

So will I notice going from 2.5Ghz to 3.6?

Also, twoblacklines, what fan are you using, and what temps are you getting?
with the E5200 and the F7P you should be fine temp wise up to 1.45V. Depending on your chip it should get you into the 4GHz+ terrain. 3.6GHz is absolutely no problem for the F7P.

At least that's my experience with this set-up

Last edited by max (2008-12-29 06:16:47)

once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
twoblacklines
all grown up now (its boring)
+49|6424
im using a Tuniq Tower 120, the original non LED fan version.

But i lost the rheobus so its on maxed fan speed all the time.

Im getting 27 deg c at idle and max 50deg c maxed out.
Freezer7Pro
I don't come here a lot anymore.
+1,447|6415|Winland

https://i205.photobucket.com/albums/bb8/Freezer7Pro/play3.png

Yes, that voltage reading is correct.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
menzo
̏̏̏̏̏̏̏̏&#
+616|6663|Amsterdam‫
that is so awsm
https://i231.photobucket.com/albums/ee37/menzo2003/fredbf2.png
GC_PaNzerFIN
Work and study @ Technical Uni
+528|6632|Finland

Freezer7Pro wrote:

http://i205.photobucket.com/albums/bb8/ … /play3.png

Yes, that voltage reading is correct.
That's the spirit... I like to show those intel recommmendations a nice MIDDLE FINGER too!
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
max
Vela Incident
+1,652|6785|NYC / Hamburg

ohhh, nice. Crazy volts though. What cooler? Still your Gemin II?
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Freezer7Pro
I don't come here a lot anymore.
+1,447|6415|Winland

max wrote:

ohhh, nice. Crazy volts though. What cooler? Still your Gemin II?
HDT1283.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
Stimey
­
+786|6337|Ontario | Canada
Got my E5200 Tonight.
Going for 3.4~ on the stock cooler?
­
­
­
­
­
­
Freezer7Pro
I don't come here a lot anymore.
+1,447|6415|Winland

Stimey wrote:

Got my E5200 Tonight.
Going for 3.4~ on the stock cooler?
Sounds like a plan.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
Stimey
­
+786|6337|Ontario | Canada
Ahhhh work in a half hour.
After
­
­
­
­
­
­
Finray
Hup! Dos, Tres, Cuatro
+2,629|6006|Catherine Black
Damn, stock cooler was so bad. So flimsy.

I get 3.6 with Freezer7, but I'm restricted due to vcore.. musta been a bad batch, although my mobo could be to blame.
https://i.imgur.com/qwWEP9F.png
max
Vela Incident
+1,652|6785|NYC / Hamburg

on stock
https://img229.imageshack.us/img229/8194/3661288sd3.jpg

stolen from here
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Freezer7Pro
I don't come here a lot anymore.
+1,447|6415|Winland

Ja, my E7400 stock cooler pushed my E7200 to 3.16 fully stable on stock volts. Temps under 70.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
IrishGrimReaper
Field Marshal | o |
+142|6938|Ireland | Monaghan

https://i94.photobucket.com/albums/l109/IrishGrimReaper/Untitled-12.jpg
Thanks to PanzerFin for helping me to get here, for now I'm happy with this speed but I'll probably try to go a bit higher soon.
Intel Core i7 CPU 920 @ 4GHz || 3x2 GB OCZ 1600Mhz DDR3 || 80GB Intel X25-M Gen 2 || KFA2 GTX 480 1536Mb ||| Samsung T220 || Xonar DX 7.1 || AV 40 || P6T Deluxe V2 || Win 7 HP 64 Bit || Lian Li P80
Finray
Hup! Dos, Tres, Cuatro
+2,629|6006|Catherine Black

IrishGrimReaper wrote:

http://i94.photobucket.com/albums/l109/ … led-12.jpg
Thanks to PanzerFin for helping me to get here, for now I'm happy with this speed but I'll probably try to go a bit higher soon.
With 1.3V you could go so much higher... Stick it at 1.5 and slap the total clock to 4.4 then stress test.. You'll do that no problem.
https://i.imgur.com/qwWEP9F.png
DUnlimited
got any popo lolo intersting?
+1,160|6681|cuntshitlake

Finray wrote:

IrishGrimReaper wrote:

http://i94.photobucket.com/albums/l109/ … led-12.jpg
Thanks to PanzerFin for helping me to get here, for now I'm happy with this speed but I'll probably try to go a bit higher soon.
With 1.3V you could go so much higher... Stick it at 1.5 and slap the total clock to 4.4 then stress test.. You'll do that no problem.
Shut up.

The safe vcore limit for E8500 is 1.4, 1.45 is not going to do very much bad and 1.5 is already pretty exterme. Better safe than sorry with 45nm CPU's.
main battle tank karthus medikopter 117 megamegapowershot gg
Finray
Hup! Dos, Tres, Cuatro
+2,629|6006|Catherine Black

DeathUnlimited wrote:

Finray wrote:

IrishGrimReaper wrote:

http://i94.photobucket.com/albums/l109/ … led-12.jpg
Thanks to PanzerFin for helping me to get here, for now I'm happy with this speed but I'll probably try to go a bit higher soon.
With 1.3V you could go so much higher... Stick it at 1.5 and slap the total clock to 4.4 then stress test.. You'll do that no problem.
Shut up.

The safe vcore limit for E8500 is 1.4, 1.45 is not going to do very much bad and 1.5 is already pretty exterme. Better safe than sorry with 45nm CPU's.
Freezer: MORE VCORE!
https://i.imgur.com/qwWEP9F.png
GC_PaNzerFIN
Work and study @ Technical Uni
+528|6632|Finland

His CPU starts to need excessive vcore around 4.2GHz. Not worth it to continue higher. And yeah for 24/7 use I would keep it around 1.4v max.
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
DUnlimited
got any popo lolo intersting?
+1,160|6681|cuntshitlake

Finray wrote:

DeathUnlimited wrote:

Finray wrote:


With 1.3V you could go so much higher... Stick it at 1.5 and slap the total clock to 4.4 then stress test.. You'll do that no problem.
Shut up.

The safe vcore limit for E8500 is 1.4, 1.45 is not going to do very much bad and 1.5 is already pretty exterme. Better safe than sorry with 45nm CPU's.
Freezer: MORE VCORE!
Difference being that Freezer knows his shit, you don't. You can't compare every CPU to yours you know.
main battle tank karthus medikopter 117 megamegapowershot gg
IrishGrimReaper
Field Marshal | o |
+142|6938|Ireland | Monaghan

Well... Panzer's been the one helping me and we hit the wall, so this OC will stay where it is, as I'm happy with it.

P.s: Hey DU, can I get updated onto that list please?

Last edited by IrishGrimReaper (2009-02-11 10:50:18)

Intel Core i7 CPU 920 @ 4GHz || 3x2 GB OCZ 1600Mhz DDR3 || 80GB Intel X25-M Gen 2 || KFA2 GTX 480 1536Mb ||| Samsung T220 || Xonar DX 7.1 || AV 40 || P6T Deluxe V2 || Win 7 HP 64 Bit || Lian Li P80
Drykill
I Like Waffles.
+47|6909|England
If this thread is still going:

https://i141.photobucket.com/albums/r62/toxicredcat/Q6600OC.jpg
menzo
̏̏̏̏̏̏̏̏&#
+616|6663|Amsterdam‫
if i see all this, I really want to start OCing again. but I have done about the max what I can get out of my P35-DS3
https://i231.photobucket.com/albums/ee37/menzo2003/fredbf2.png

Board footer

Privacy Policy - © 2024 Jeff Minard