umm, it says that max completed 0 points?max wrote:
http://fah-web.stanford.edu/awards/cert … pts=505010
1/2 million fuck yeah
also dibs on all your old stuff
Last edited by Jenspm (2008-08-27 10:24:31)
He got reset for padding.Jenspm wrote:
umm, it says that max completed 0 points?max wrote:
http://fah-web.stanford.edu/awards/cert … pts=505010
1/2 million fuck yeah
also dibs on all your old stuff
something must have been wrong with the certificates
I still have all my points
Also 1.5million points for the team
I still have all my points
Also 1.5million points for the team
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
I keep reading about all this folding...
What is it, and why should I do it (DUmb it down, please )?
If it helps, here's my PC Specs:
E4400 2.8GHz
2GB RAM
2 x 7600GT (SLI)
460W PSU
Gigabyte DS4 SLI MoBo
What is it, and why should I do it (DUmb it down, please )?
If it helps, here's my PC Specs:
E4400 2.8GHz
2GB RAM
2 x 7600GT (SLI)
460W PSU
Gigabyte DS4 SLI MoBo
When I run the gpu client, it only uses 25-35% of the gpu core. How can I make it use more? Right now I'm getting terrible ppd. (619 on an HD 4850)
That CPU coulld probably make around 1500PPD.FFLink13 wrote:
I keep reading about all this folding...
What is it, and why should I do it (DUmb it down, please )?
If it helps, here's my PC Specs:
E4400 2.8GHz
2GB RAM
2 x 7600GT (SLI)
460W PSU
Gigabyte DS4 SLI MoBo
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
FYI: gone until sunday
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
:Smax wrote:
FYI: gone until sunday
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
Got it all set up, 8800GTS (512) and E8500, but for some reason only one of the cpu processes works
SMP client?The Sheriff wrote:
Got it all set up, 8800GTS (512) and E8500, but for some reason only one of the cpu processes works
no, the cpu one.Sydney wrote:
SMP client?The Sheriff wrote:
Got it all set up, 8800GTS (512) and E8500, but for some reason only one of the cpu processes works
Nvidia GPUs responsible for 42% of Folding@home output
http://www.custompc.co.uk/news/604716/n … utput.html
http://www.custompc.co.uk/news/604716/n … utput.html
Never mind it's working now.
From reading the instructions in the original post, using fahmon seemed idiot proof, but I can't get it to work on my machine...both the CPU and GPU clients are working, but fahmon doesn't display anything. Oh well at least the important stuff is working.
Did you add the clients to FahMon?-CARNIFEX-[LOC] wrote:
From reading the instructions in the original post, using fahmon seemed idiot proof, but I can't get it to work on my machine...both the CPU and GPU clients are working, but fahmon doesn't display anything. Oh well at least the important stuff is working.
main battle tank karthus medikopter 117 megamegapowershot gg
EDIT:
With the newest CPU client, I had to point fahmon to C:\Documents and Settings\Name\Application Data\Folding@home-x86, not to C:\FAH\[CPU #]...
Not sure if I misread the directions, but everything seems to work now...
But instead of fahmon listing 3 CPUs and a GPU, I simply have 1 CPU listed and 1 GPU...the CPU is at approx. 800 ppd, though, so I'm assuming all 4 cores must be working.
With the newest CPU client, I had to point fahmon to C:\Documents and Settings\Name\Application Data\Folding@home-x86, not to C:\FAH\[CPU #]...
Not sure if I misread the directions, but everything seems to work now...
But instead of fahmon listing 3 CPUs and a GPU, I simply have 1 CPU listed and 1 GPU...the CPU is at approx. 800 ppd, though, so I'm assuming all 4 cores must be working.
Last edited by -CARNIFEX-[LOC] (2008-08-28 10:04:07)
I think all the directions max typed up on the first page of this thread are completely useless now. The new CPU client is easier to set up and you don't have to make the separate folders for each core or anything. Or maybe it's just that way with the SMP client, not sure.
Agreed, its all out of Date. One of the links to the downloads are wrong- either that, or the instructions are wrong, as they make no sense what-so-ever.SpIk3y wrote:
I think all the directions max typed up on the first page of this thread are completely useless now. The new CPU client is easier to set up and you don't have to make the separate folders for each core or anything. Or maybe it's just that way with the SMP client, not sure.
It's just that way with the SMP client.SpIk3y wrote:
I think all the directions max typed up on the first page of this thread are completely useless now. The new CPU client is easier to set up and you don't have to make the separate folders for each core or anything. Or maybe it's just that way with the SMP client, not sure.
Gotta alarm maxTitch2349 wrote:
Agreed, its all out of Date. One of the links to the downloads are wrong- either that, or the instructions are wrong, as they make no sense what-so-ever.
main battle tank karthus medikopter 117 megamegapowershot gg
Well I assume that just about everybody folding for BF2s has a dual core CPU, meaning they will most definitely want to use the SMP client because it gives you much more PPD. So while those directions are extremely well written and organized, I think they are obsolete.
update itSpIk3y wrote:
Well I assume that just about everybody folding for BF2s has a dual core CPU, meaning they will most definitely want to use the SMP client because it gives you much more PPD. So while those directions are extremely well written and organized, I think they are obsolete.
make new instructions so he can post them
im sure people would want to know
To set up SMP client...
1. Download and install the CPU client from link in OP
2. Go to install directory and run install.bat
3. Enter in your Windows account info (name and password) as prompted
4. Create shortcut for folding@home executable (located in install directory) and add -smp to the target.
5. Run the shortcut you just created
6. Enter in F@H user name, F@H team number (137764), and leave passkey blank (just follow the prompts)
Note: Must have password on account for SMP client to run.
The GPU client is the same as the one explained in the OP I believe.
1. Download and install the CPU client from link in OP
2. Go to install directory and run install.bat
3. Enter in your Windows account info (name and password) as prompted
4. Create shortcut for folding@home executable (located in install directory) and add -smp to the target.
5. Run the shortcut you just created
6. Enter in F@H user name, F@H team number (137764), and leave passkey blank (just follow the prompts)
Note: Must have password on account for SMP client to run.
The GPU client is the same as the one explained in the OP I believe.
I cannot open it via shortcut, I have to use command prompt.SpIk3y wrote:
To set up SMP client...
1. Download and install the CPU client from link in OP
2. Go to install directory and run install.bat
3. Enter in your Windows account info (name and password) as prompted
4. Create shortcut for folding@home executable (located in install directory) and add -smp to the target.
5. Run the shortcut you just created
6. Enter in F@H user name, F@H team number (137764), and leave passkey blank (just follow the prompts)
Note: Must have password on account for SMP client to run.
The GPU client is the same as the one explained in the OP I believe.
This is what I went by: http://forums.legitreviews.com/about16873.html
main battle tank karthus medikopter 117 megamegapowershot gg
Whats the Passkey? it saying it has to be 32 char long?! wtf??
I'll update the guide asap
don't use a passkey. Just leave it blankxRBLx wrote:
Whats the Passkey? it saying it has to be 32 char long?! wtf??
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.