could be, could be.
tbhFloppY_ wrote:
Sounds to me like you didn't really know what you were doingaerodynamic wrote:
Well some how those three viruses fucked up my windows and nothing would work.
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
That's loaded vcore in cpu-z (and how is that alot of vcore for 65nm I know people who run 1.55+ according to cpuz 24/7 ) really don't remember what the bios setting is (1.5**) and i use eist and c1e to drop vcore and multi on idle. this board has alot of vdroop/drop it idles @ 1.51 without them but 1.42 with.max wrote:
That's a lot of voltage: CPU-z or BIOS setting?jaymz9350 wrote:
Q6600 @ 3.6 (400x9) 1.47 vcore Cooled by a TRUE with 2 yate loon high speeds in push pull
FSB termination, PLL, ... settings?
Edit: Also this board isn't the best OC'er for quads, With a better board I could probably run less vcore as I've seen other so it when switching to a more quad friendly board (in case you didn't notice in the pic it's an Abit IP35-pro)
Last edited by jaymz9350 (2008-12-25 18:04:50)
mac users, tbhFloppY_ wrote:
Sounds to me like you didn't really know what you were doingaerodynamic wrote:
Well some how those three viruses fucked up my windows and nothing would work.
/flamebait
All I'm saying is that 1.47Vcore is a fair amount of voltage for a q6600 @ 3.6GHz. Maybe some tweaking of the other voltages and a Vdroop mod could help minimize the voltage / temps / noise or increase you OCjaymz9350 wrote:
That's loaded vcore in cpu-z (and how is that alot of vcore for 65nm I know people who run 1.55+ according to cpuz 24/7 ) really don't remember what the bios setting is (1.5**) and i use eist and c1e to drop vcore and multi on idle. this board has alot of vdroop/drop it idles @ 1.51 without them but 1.42 with.max wrote:
That's a lot of voltage: CPU-z or BIOS setting?jaymz9350 wrote:
Q6600 @ 3.6 (400x9) 1.47 vcore Cooled by a TRUE with 2 yate loon high speeds in push pull
FSB termination, PLL, ... settings?
Edit: Also this board isn't the best OC'er for quads, With a better board I could probably run less vcore as I've seen other so it when switching to a more quad friendly board (in case you didn't notice in the pic it's an Abit IP35-pro)
anything below 1.55V is considered safe for 65nm ... providing your cooler can handle it
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
The voltage settings I have are vcoree, cpu vtt, and mch (besides the southbridge) no matter how much any others get this is the lowest vcore I can get 3.6 stable on all 4 cores (3 of 4 are good at a few notches down) I think the main limit is the board itself not the chip. I've seen others switch boards and get stable with around .1 less vcore.max wrote:
All I'm saying is that 1.47Vcore is a fair amount of voltage for a q6600 @ 3.6GHz. Maybe some tweaking of the other voltages and a Vdroop mod could help minimize the voltage / temps / noise or increase you OC
anything below 1.55V is considered safe for 65nm ... providing your cooler can handle it
Never tried any mobo mods and am a little hesitant to, if I f it up i'm sol on a board.
Really I'm quite happy, 3.6 was my goal when I bought it (the first chip I've had reach my initial goal) and temps are fine, 60c on two cores and 55c on the other 2 with fans on 12v and about 5c higher at 7v, when just web surfing I run the fans at 5v and are basically silent. It basically came down to being to lazy to go for much more as I have limited time to sit and tweak on it and it runs great as is.
Last edited by jaymz9350 (2008-12-25 18:45:44)
Can too little voltage damage ur CPU at all? because im running e8400 @ 4.05 Ghz... on 1.29v and have used OCCT and Prime96 and they both say the overclock is stable... it just seems like a very small amount of voltage increase since some people are running 1.4 for 4ghz...
If your stable your safe. Every chip is different but having to use low vcore isn't something to complain about. How long did you stress it?Little BaBy JESUS wrote:
Can too little voltage damage ur CPU at all? because im running e8400 @ 4.05 Ghz... on 1.29v and have used OCCT and Prime96 and they both say the overclock is stable... it just seems like a very small amount of voltage increase since some people are running 1.4 for 4ghz...
selling my Asus P5E X38 + E2180 for at least 180€. Means I can afford at least the XFX GTX 260+ BLACK EDITION. wooooot!
But because there is the funky looking black brick with nVIDIA sticker coming... I most certainly try to afford the GTX 295
But because there is the funky looking black brick with nVIDIA sticker coming... I most certainly try to afford the GTX 295
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
did the normal 1 hour on OCCT and i dont remember exactly but a couple hours on Prime95... i watched a ~2 hour movie and went out for lunch so ill just say 3 hours.jaymz9350 wrote:
If your stable your safe. Every chip is different but having to use low vcore isn't something to complain about. How long did you stress it?Little BaBy JESUS wrote:
Can too little voltage damage ur CPU at all? because im running e8400 @ 4.05 Ghz... on 1.29v and have used OCCT and Prime96 and they both say the overclock is stable... it just seems like a very small amount of voltage increase since some people are running 1.4 for 4ghz...
http://www.overclock.net/hardware-news/ … 1-6-a.html
If you pass 5 threads in Intel Burn Test, you are stable.
If you pass 5 threads in Intel Burn Test, you are stable.
wiring management is bleh, but who cares, eh?
this
this
I have recently purchased a Coolermaster 932 HAF and freezer 7 pro to go with my rig. Its a big improvement on the Antec 900 as it is quieter and has much more room for cable management and better parts for when I upgrade
Specs:
Tower: Coolermaster 932 HAF (High Air Flow)
Cpu: Intel Pentium 4 @ 3.2ghz stock
Hsf : Freezer 7 Pro
MoBo: Asus P5GD2 Deluxe
Ram: GeIL 2GB (2x1GB) PC2-6400C4 800MHz DDR2 Dual Channel Kit
Gpu: ATI Radeon X1900XT 512mb
Hdd's: 2x Western Digital 74GB Raptors in RAID 0
Psu: Hyper Type M 730w
Monitor: Relisys 17inch LCD monitor
Sound: Creative 5.1 Surround Sound + Phillips Voip Headset
Mouse: Logitech G5
Kb: Dell Office Keyboard
Mmat: Boogie Bug AimB.Pad XL Gaming Surface
I know my rig isn't all that good but I will hopefully be upgrading soon: Asus P5Q, Q9450, 4gig Ram, Vista 64bit
Pics:
It took me a while to do cable management, I just need some right angled sata connectors
The fans are actually going around here.. i was surprised the camera snap it that quickly
Side fan in comparison its huge!
Specs:
Tower: Coolermaster 932 HAF (High Air Flow)
Cpu: Intel Pentium 4 @ 3.2ghz stock
Hsf : Freezer 7 Pro
MoBo: Asus P5GD2 Deluxe
Ram: GeIL 2GB (2x1GB) PC2-6400C4 800MHz DDR2 Dual Channel Kit
Gpu: ATI Radeon X1900XT 512mb
Hdd's: 2x Western Digital 74GB Raptors in RAID 0
Psu: Hyper Type M 730w
Monitor: Relisys 17inch LCD monitor
Sound: Creative 5.1 Surround Sound + Phillips Voip Headset
Mouse: Logitech G5
Kb: Dell Office Keyboard
Mmat: Boogie Bug AimB.Pad XL Gaming Surface
I know my rig isn't all that good but I will hopefully be upgrading soon: Asus P5Q, Q9450, 4gig Ram, Vista 64bit
Pics:
It took me a while to do cable management, I just need some right angled sata connectors
The fans are actually going around here.. i was surprised the camera snap it that quickly
Side fan in comparison its huge!
Awesome, looks great Can't wait to get mine.Kurazoo wrote:
I have recently purchased a Coolermaster 932 HAF and freezer 7 pro to go with my rig. Its a big improvement on the Antec 900 as it is quieter and has much more room for cable management and better parts for when I upgrade
Specs:
Tower: Coolermaster 932 HAF (High Air Flow)
Cpu: Intel Pentium 4 @ 3.2ghz stock
Hsf : Freezer 7 Pro
MoBo: Asus P5GD2 Deluxe
Ram: GeIL 2GB (2x1GB) PC2-6400C4 800MHz DDR2 Dual Channel Kit
Gpu: ATI Radeon X1900XT 512mb
Hdd's: 2x Western Digital 74GB Raptors in RAID 0
Psu: Hyper Type M 730w
Monitor: Relisys 17inch LCD monitor
Sound: Creative 5.1 Surround Sound + Phillips Voip Headset
Mouse: Logitech G5
Kb: Dell Office Keyboard
Mmat: Boogie Bug AimB.Pad XL Gaming Surface
I know my rig isn't all that good but I will hopefully be upgrading soon: Asus P5Q, Q9450, 4gig Ram, Vista 64bit
Pics:
http://img156.imageshack.us/img156/3708/outercx0.jpg
It took me a while to do cable management, I just need some right angled sata connectors
http://img253.imageshack.us/img253/6117/inside1km8.jpg
The fans are actually going around here.. i was surprised the camera snap it that quickly
http://img83.imageshack.us/img83/9090/inside2bt2.jpg
Side fan in comparison its huge!
http://img444.imageshack.us/img444/5572 … sonmn4.jpg
That side fan ain't got nothing on the AeroRacer ProFFLink13 wrote:
Awesome, looks great Can't wait to get mine.Kurazoo wrote:
I have recently purchased a Coolermaster 932 HAF and freezer 7 pro to go with my rig. Its a big improvement on the Antec 900 as it is quieter and has much more room for cable management and better parts for when I upgrade
Specs:
Tower: Coolermaster 932 HAF (High Air Flow)
Cpu: Intel Pentium 4 @ 3.2ghz stock
Hsf : Freezer 7 Pro
MoBo: Asus P5GD2 Deluxe
Ram: GeIL 2GB (2x1GB) PC2-6400C4 800MHz DDR2 Dual Channel Kit
Gpu: ATI Radeon X1900XT 512mb
Hdd's: 2x Western Digital 74GB Raptors in RAID 0
Psu: Hyper Type M 730w
Monitor: Relisys 17inch LCD monitor
Sound: Creative 5.1 Surround Sound + Phillips Voip Headset
Mouse: Logitech G5
Kb: Dell Office Keyboard
Mmat: Boogie Bug AimB.Pad XL Gaming Surface
I know my rig isn't all that good but I will hopefully be upgrading soon: Asus P5Q, Q9450, 4gig Ram, Vista 64bit
Pics:
http://img156.imageshack.us/img156/3708/outercx0.jpg
It took me a while to do cable management, I just need some right angled sata connectors
http://img253.imageshack.us/img253/6117/inside1km8.jpg
The fans are actually going around here.. i was surprised the camera snap it that quickly
http://img83.imageshack.us/img83/9090/inside2bt2.jpg
Side fan in comparison its huge!
http://img444.imageshack.us/img444/5572 … sonmn4.jpg
Your thoughts, insights, and musings on this matter intrigue me
Case ( Coolermaster HAF 932 Full-Tower Gaming Case w/420W Power Supply Black )
Processor ( [=== Quad Core ===] Intel Core 2 Quad Processor Q6600 (4x 2.4GHz/8MB L2 Cache/1066FSB) )
Motherboard ( [SLI] Asus P5N-D Nvidia nForce 750i SLI Chipset w/7.1 Sound, Gb LAN, S-ATA Raid, USB 2.0, IEEE-1394, Dual PCI-E MB EPU Technology )
Memory ( 2 GB [1 GB X2] DDR2-800 PC6400 Memory Module Corsair-Value or Major Brand )
Video Card ( NVIDIA GeForce 9500GT 1GB w/DVI + TV Out Video )
Video Card Brand ( Major Brand Powered by NVIDIA )
Hard Drive ( 500 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache] )
should arrive any day now
Processor ( [=== Quad Core ===] Intel Core 2 Quad Processor Q6600 (4x 2.4GHz/8MB L2 Cache/1066FSB) )
Motherboard ( [SLI] Asus P5N-D Nvidia nForce 750i SLI Chipset w/7.1 Sound, Gb LAN, S-ATA Raid, USB 2.0, IEEE-1394, Dual PCI-E MB EPU Technology )
Memory ( 2 GB [1 GB X2] DDR2-800 PC6400 Memory Module Corsair-Value or Major Brand )
Video Card ( NVIDIA GeForce 9500GT 1GB w/DVI + TV Out Video )
Video Card Brand ( Major Brand Powered by NVIDIA )
Hard Drive ( 500 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache] )
should arrive any day now
Why on earth did you order the Q6600 when the E8400 dual-core costs the same and performs way betterMAGUIRE93 wrote:
Case ( Coolermaster HAF 932 Full-Tower Gaming Case w/420W Power Supply Black )
Processor ( [=== Quad Core ===] Intel Core 2 Quad Processor Q6600 (4x 2.4GHz/8MB L2 Cache/1066FSB) )
Motherboard ( [SLI] Asus P5N-D Nvidia nForce 750i SLI Chipset w/7.1 Sound, Gb LAN, S-ATA Raid, USB 2.0, IEEE-1394, Dual PCI-E MB EPU Technology )
Memory ( 2 GB [1 GB X2] DDR2-800 PC6400 Memory Module Corsair-Value or Major Brand )
Video Card ( NVIDIA GeForce 9500GT 1GB w/DVI + TV Out Video )
Video Card Brand ( Major Brand Powered by NVIDIA )
Hard Drive ( 500 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache] )
should arrive any day now
Your thoughts, insights, and musings on this matter intrigue me
http://i141.photobucket.com/albums/r79/ … ics010.jpg
Components:
Intel E8400 (Plan to OC soon )
Artic Freezer 7 Pro
Antec P182 (Indeed, this case is )
OCZ 600W PSU*
XFX 9800GT*
4GB XMS2 Corsair 800Mhz
WD Caviar 250GB HDD*
Last edited by TopHat01 (2008-12-27 16:18:18)
sig plus same cooler as tophat and a thermaltake armour case 120 mm fan on side 2* 90 mm on front 1* 90 mm on top 1* 90 mm rear
this one but modified
this one but modified
Last edited by woodrot (2008-12-27 16:35:31)
F7P doesn't fit amd
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
I want the HAF but it just looks so ugly.
Remember, you're gay if you think such thoughts.Stimey wrote:
I want the HAF but it just looks so ugly.
I'm comfortable with who I am.
Why does it have to have that ugly writing on the side?
Why does it have to have that ugly writing on the side?
Does look pretty ugly tbh,,FFLink13 wrote:
Remember, you're gay if you don't think such thoughts.Stimey wrote:
I want the HAF but it just looks so ugly.
Your thoughts, insights, and musings on this matter intrigue me
i think it looks sexy.Stimey wrote:
I want the HAF but it just looks so ugly.